The communication with the synchronization module is interrupted.
Category Archives: Event Codes
Event 167 – No rotation monitoring / evaluation
Simulation of the engine speed so that the generator can be started without inverter in case of service.
Event 133 – CAN communication lost: Generator Control has lost 3-phase Module
The communication with the 3-phase module is interrupted once it was connected.
Event 38 – Output Inverter DC supply low
The current at the output for the DC supply voltage of the inverter is below its lower limit.
Event 165 – Converter Emergency Stop
Converter emergency shutdown.
Event 79 – Flame plug output high
The voltage drop between the output for the flame plug and ground is above its upper limit.
Event 90 – Engine revolution (RPM) high
The revolution speed of the diesel engine is above its upper limit.
Event 85 – Boost relay high
At this digital output the voltage drop is monitored. The voltage drop between output for the boost relay and ground is above its upper limit.
Event 21 – Boost relay low
At this digital output the voltage drop is monitored. The voltage drop between output for the boost relay and ground is below its lower limit.
Event 84 – Current sensor supply high
The current at the output for the current sensor is above its upper limit.