Application
The »fpControl Control Panel – Generator« (fpControl CP-G) is intended for use on generators with xControl or fpControl system. It is the user interface of the control system and is used to operate and display system data. In addition, parameters can be set in the service area.
Product description
- Automatic start contact to start and stop the generator in addition to the start / stop button.
- Operating temperature range from -20 °C to +50 °C.
- Display resolution: 128 x 64 pixels.
- Integrated display heater.
- Integrated buzzer for the acoustic output of warnings and errors.
- Each »fpControl CP-G« can also be used as a slave panel and as an update panel for software update.
- When used as an update panel, the »fpControl CP-G« works like a USB removable storage device on which the update files for all updateable system components can be stored.
- Several slave panels can be used in one system.
Controls
| Button Symbol | Function |
 | on / off |
 | up |
 | down |
 | start / stop |
Connectors
| Connector | Assignment |
| X3 | Removable disk for update files (USB) |
| X103 | Supply voltage and »fpCAN« |
| X102 | Supply voltage and »fpCAN« |
| X101 | Automatic start contact |
Pin assignments
Pin assignment of »X103« and »X102« for supply voltage and »fpCAN«
RJ45 socket.
Note: Bus termination is required if the »fpControl CP-G« is the last module in the »fpCAN«.
| Pin | Line |
| 1 | CAN high |
| 2 | CAN low |
| 3 | GND |
| 4 | Wake up |
| 5 | Bus power |
| 6 | GND |
| 7 | GND |
| 8 | Bus power |
Environmental specifications and physical data
| Storage temperature | -10 °C – +60 °C |
| Operating temperature | -20 °C – +50 °C |
| Supply voltage | 12 V oder 24 V, Automotive (12–13,5 V oder 24–28 V) |
| Rated current consumption | < 21 mA @ 12 V (without display heating) < 18 mA @ 24 V (without display heating) |
| Max. current consumption | 120 mA (including display heating) |
| Current consumption in standby mode / off | 0 A |
| Housing | ABS plastic |
| Protection class | IP30 (plugged in RJ45 connector) |
| Overall dimensions | 120 x 65 x 35 mm (L x B x H), Cutout: 109,2 x 54,5 mm |
| Weight | 0,11 kg |
| FP part number | 0029338 |
| Printed circuit board | FP1403 |
Accessories
fpCAN patch cable
Available in different length. With a data transfer rate of 250 kbps and up to 30 nodes, the maximum cable length is 40 meters.
| Length | Fischer Panda part number |
| 25 m | 0013474 |
| 15 m | 0004686 |
| 10 m | 0013473 |
| 6 m | 0013472 |
| 3 m | 0013471 |
| 1 m | 0013470 |
| 0,5 m | 0013468 |
| 0,2 m | 0013466 |
Terminating resistor
The ends of the »fpCAN« network must be terminated with a 120 ohm resistor.
»fpCAN« terminating resistor 120 Ohm with RJ45 connector, red RAL 3000 with FP logo. Fischer Panda part number 0003022.
