You can connect a Fischer Panda AGT generator to a battery management system (BMS). In BMS UI mode the AGT can control either on voltage or on current.
Overview of the Module IDs, product and short names, printed circuit boards and start addresses of all fpCAN bus participants.
With the tank refill function of fpControl you can refill the integrated tank of the generator with diesel fuel from a separate additional tank.
Connecting electric drive systems with the AC Drive Controllers Family SAC from Piktronik to the »fpCAN« via the »Communication Interface CI – NMEA 2000®«.
The Fischer Panda CAN bus »fpCAN« has been completely integrated into the Victron GX system. This provides control and monitoring of the Fischer Panda Genset using the Victron Color Control GX, Venus GX or Cerbo GX. Furthermore, it is possible to monitor and control the Fischer Panda Genset via a Marine MFD.
You can preheat the diesel engine with a cold start aid. This is necessary if the generator is started at an ambient temperature of less than -20 °C.
You can use the shore power switch-over to automatically switch the supply of your on-board network between the shore network and the generator. This switch-over is used if the mains voltage fails. When the mains voltage is restored, the switch-over can switch back to shore power.